- Wood Plastic Composite Machine
- Profile Extrusion Lines
- Pipe Extrusion Lines
- Recycling& Granulating Lines
- Conveying & Feeding System
- Mixer And Mixing Plant
- Auxiliary Machines
- Tel: +86(0)512 58529030
- +86(0)512 58529031
- Fax: +86(0)512 58651907
- Mobile:+86 18915677721
- E-Mail: email@example.com
- Website: www.abelplas.com
A、Dump PVC etc. Materials
PVC and other material are manually poured into dump station and conveyed into 4 storehouses pneumatically. Workers will be alert by the material meter signal to feed or stop. The store house is equipped with loosing material device
B、Measurement and feeding of materials
Main material is fed into 3 electronic balance and then mixer by rotary valve below store house.
C、Putting auxiliary materials
Auxiliary materials are fed by step in feeder after manual measuring. When mixer ask auxiliary materials, the pneumatic board valve come to open, step in feeder starts, infrared ray test the material overpass, step in feeder stops, time-lapse stop pneumatic board valve.
D、Heating mixing and cooling mixing
In heating mixing, at the same time water is drained by compulsion absorption device; when materials reach the set temperature, discharging valve will open automatically and material enter cooling mixer. When material come to set temperature of cooling, cold discharging valve will open automatically and materials move into a storehouse of 1 m³
PVC, dry material and broken materials will be clean by an impulse dust catcher; this device can adjust pulse frequency and width.