News

Double Stage Plastic Pelletizing Line

Posted by Ableplas

SJ100/24 +SJ100/10 For HDPE  Rigid Scrap Recycling  has delivered to the Mexico Customer this week. 

Customer background 

A Mexico recycler processes post -consumer HDPE injection scrap (moisture less than 5%) 

Challenges with Previous Single- stage Line 

  1. overheated melt- burnt pellets &degraded material properties 
  2. unstable strand flow due to pressure fluctuation 
  3. frequent screen back changes 
  4. low output 

Our solution- Double stage strand pelleting System 

First stage: SJ100/24 ( L/D 24:1) -Plasticizing 

  1. High torque gearbox for heavy -duty melting 
  2. Hydraulic screen changer for dirty material 
  3. vacuum degassing port to remove mositure 

Second stage: SJ100/10 (L/D10:1) cooling &strand extrusion 

  1. low shear screw- reduces melt temperature by 40-50 degree 
  2. 32 strand die head with indicidual flow adjustment 
  3. static mixer for unifor strand flow 

Measured Results (after 4 weeks)

Parameter Before After Improvement
Melt temperature at die 245°C 198°C ↓ 47°C
Strand break frequency 8–10/shift 0–1/shift ↓ 90%
Output (HDPE flakes) 280 kg/h 450 kg/h ↑ 61%
Screen change interval 4–5 hours 12–14 hours ↑ 180%
Burned pellets reject rate 5–7% <1% ↓ 85%
Pellet bulk density 0.48 g/cm³ 0.56 g/cm³ ↑ 17%

Why This Double-Stage Configuration Works

· Handles contaminated/moist feed without stalling
· Low pressure, low temperature → perfect strands
· Energy efficient: second stage uses only 55kW
· Ideal for: HDPE, PP, LDPE rigid, ABS, PS;

We value your privacy

We use cookies to enhance your browsing experience, serve personalised ads or content, and analyse our traffic. By clicking "Accept All", you consent to our use of cookies.